Completing The Installation; Replacing The Dimm Air Baffle - IBM System x3690 X5 Installation And User Manual

Completing the installation

To complete the installation, complete the following steps:
1. If you removed any air baffles or the memory tray, reinstall them (see
2. Replace the fan cage assembly, if removed (see "Replacing the fan cage
3. Reconnect the cables and power cords (see "Connecting the cables" on page
4. Update the server configuration (see "Updating the server configuration" on
5. If you removed the server cover, replace it (see "Replacing the server top
6. Start the server. Confirm that is starts correctly and recognizes the newly
7. Complete the additional steps in "Instructions for IBM Business Partners" on
8. Install the server in the rack cabinet (see the Rack Installation Instructions that

Replacing the DIMM air baffle

To install the DIMM air baffle, complete the following steps:
1. Read the safety information that begins on page "Safety" on page v and
2. Align the tabs on the sides of the DIMM air baffle with the slots on the power
112
System x3690 X5 Types 7147, 7148, 7149, and 7192: Installation and User's Guide
"Replacing the DIMM air baffle," "Replacing the memory tray" on page 113,
and "Replacing the microprocessor air baffle" on page 113).
assembly" on page 114).
116).
page 117).
cover" on page 115).
installed devices, and make sure that no error LEDs are lit.
page 34.
come with the server for instructions).
"Installation guidelines" on page 44.
supply cage and the chassis wall and lower the DIMM air baffle into the server.
RAID
battery
trays
DIMM
air baffle
Alignment slots