Removing The Memory Tray - IBM System x3690 X5 Installation And User Manual

If you have other devices to install or remove, do so now. Otherwise, go to
"Completing the installation" on page 112.

Removing the memory tray

To remove the memory tray, complete the following steps:
1. Read the safety information that begins on page "Safety" on page v and
"Installation guidelines" on page 44.
2. Turn off the server and all attached peripheral devices. Disconnect all power
cords; then, disconnect all external cables from the server.
Note: When the cover is removed from the server, the server automatically
powers off. To view any LEDs on the system board, press the Light path
button to light the LEDs.
3. If the server has been installed in a rack, slide the server out from the rack
enclosure.
4. Remove the top cover (see "Removing the server top cover" on page 46.
5. If any remote RAID adapter batteries are stored in the RAID battery trays on
top of the memory tray, remove the battery tray and set it aside; then, grasp the
memory tray handle by the blue touch points and rotate it all the way up (this
disengages the memory tray from the connectors on the system board).
Top cover
Cover release
latch
Chapter 2. Installing optional devices
47