Rear View - IBM System x3690 X5 Installation And User Manual

For additional information about the LEDs on the light path diagnostics panel, see
the Problem Determination and Service Guide.

Rear view

The following illustrations show the connectors and LEDs on the rear of the server.
PCI
slot 2
PCI
slot 1
Video Serial
connector
System
management
Ethernet
connector
v QPI ports: Insert either a QPI cable or a filler panel in each of these connectors.
v PCI riser slot 1: Insert the PCI riser card with two slots or the PCI riser cards
with one slot into this slot. Standard models of the server come with two PCI
Express riser assemblies. See "Installing an adapter" on page 70 for the
supported adapters for these riser-cards.
v PCI riser slot 2: Insert the PCI riser card with three slots into this slot. Standard
models of the server come with two PCI Express riser assemblies. See "Installing
an adapter" on page 70 for information about adapters that this riser card
support.
v Power connector: Connect the power cord to this connector.
v AC power LED: Each hot-swap power supply has an ac power LED and a dc
power LED. When the ac power LED is lit, it indicates that sufficient power is
Ethernet 1
PCI
slot 4
PCI
PCI
slot 5
slot 3
QPI QPI USBs
port 1 port 2 3 - 4
Ethernet Ethernet
activity LED link LED
QPI link LEDs
Power-on LED (green)
Locator LED (blue)
System error LED (amber)
Chapter 1. The System x3690 X5 Types 7147, 7148, 7149, and 7192 server
Ethernet 2
Power
Power
supply 4
supply 3
USBs Power
5 - 6 connectors
Power Power
supply 1 supply 2
AC LED
(green)
DC LED
(green)
Power-supply
error LED
(amber)
21