Horizon Fitness HORIZON SERIES EX-56 User Manual page 6

A SS E MBLY ST EP 
SPLIT TEFLON WASHER (H)
SPACER (I)
U BRACKET
LOWER LINK ARM
BOLT (J)
FLAT WASHER (K)
PEDAL ARMS
A ) Open HARDWARE BAG FOR STEP 4.
B) Align LOWER LINK ARM with U BRACKET.
CAUTION: Be careful to keep the LOWER LINK ARM aligned with guide rail. Do not twist it to the left or right
while positioning it on the U BRACKET.
C) Slide SPACER (I) through U BRACKET and FOOTPLATE TUBE.
D) Insert FLAT WASHER (K) and BOLT (J) into outside end of FOOTPLATE TUBE
E) Insert 2 SPLIT TEFLON WASHERS (H) on left and right sides of FOOT PLATE TUBE & Tighten BOLT (J).
F) Repeat on other side.
HARDWARE BAG FOR STEP  CONTENTS :
SPLIT TEFLON WASHER (H)
24 mm
Qty: 4
10
EX-56_User_Guide_Rev.1.2.indd 10-11
U BRACKET
SPLIT
BOLT (J)
TEFLON WASHER (H)
INSERT
SPACER
THIS
DIRECTION
FOOTPLATE TUBE
FOOTPLATE TUBE
FLAT WASHER (K) SPACER (I)
TOP VIEW OF LEFT FOOT PAD
SPACER (I)
70 mm axis
Qty: 2
BOLT (J) FLAT WASHER (K)
15 mm 35 mm
Qty: 2 Qty: 2
ASSEMBLY STEP 5
GUIDE RAIL
LOWER LINK ARM
A) Open HARDWARE BAG FOR STEP 5.
B) Slide SPACER (G) into LOWER HANDLEBAR.
C) Place TEFLON WASHERS (H) on either side of SPACER (G). While holding TEFLON WASHERS (H) slide LOWER
LINK ARM into bottom end of LOWER HANDLEBAR.
D) Insert BOLT (F) into LOWER HANDLEBAR and secure using NUT (E).
E) Attach the OUTSIDE ELBOW COVER to elbow joint using 1 SCREW (L).
F) Snap the INSIDE ELBOW COVER onto the OUTSIDE ELBOW COVER.
Note the position of the snap tabs before snapping into position.
G) Repeat on other side.
LOWER LINK ARM
LOWER LINK ARM LOWER
HANDLEBAR
TEFLON WASHERS
SPACER
LOWER HANDLEBAR
NUT (E)
BOLT (F)
SPACER (G)
TEFLON WASHERS (H)
INSIDE
ELBOW COVER LOWER HANDLEBAR
OUTSIDE
ELBOW COVER
SCREW (L)
11
3/29/07 11:55:40 AM