Assembly - Horizon Fitness HORIZON SERIES EX-56 User Manual

CONSOLE
GRIP PULSE
WATER BOTTLE HOLDER
CONSOLE MAST
TOP COVER
PIVOTING FOOT PAD
PEDAL ARM
WHEEL COVER
TOOLS INCLUDED
5mm Allen Wrench
c
6mm Allen Wrench
c
Phillips Screw Driver
c
13/15mm Flat Wrench
c
If you have questions or if there are any missing parts, contact Customer Tech Support.
Contact information is located on the back panel of this manual.
For a complete exploded diagram, visit us at www.horizonfitness.com
6
EX-56_User_Guide_Rev.1.2.indd 6-7
FRONT STABILIZER COVER
PARTS INCLUDED
1 Console 2 Elbow Cover Sets
c c
1 Console Mast 2 Front Stabilizer Covers
c c
1 Front Stabilizer Tube 2 Handle Bar Cover Sets
c c
2 Upper Handlebars 1 Water Bottle Holder
c c
2 Lower Handlebars
c
2 Lower Link / Pivoting Foot Pads
c
2 Top Covers
c
1 HORIZON FITNESS
c
12-Volt Power Adapter
4 Hardware Bags
c
ASSEMBLY STEP 1
HARDWARE BAG FOR STEP 1 CONTENTS :
UPPER HANDLEBAR
BOLT (A)
20 mm
Qty: 2
HANDLE BAR COVER
MAIN FRAME
LOWER HANDLEBAR
LOWER LINK ARM
ELBOW COVER
REAR STABILIZER
A) Open HARDWARE BAG FOR STEP 1.
B) Attach the FRONT STABILIZER TUBE to the MAIN FRAME using 2 BOLTS (A), 2 SPRING WASHERS (B) and 2
FLAT WASHERS (C).
C) Attach FRONT STABILIZER COVERS using 4 SCREWS (M).
BOLT (A)
SPRING WASHER (B)
FLAT WASHER (C)
SPRING WASHER (B) FLAT WASHER (C) SCREW (M)
18 mm
20 mm Qty: 4
Qty: 2 Qty: 2
MAIN FRAME
FRONT STABILIZER COVERS
SCREW (M)
FRONT STABILIZER TUBE
BOLT (A)
SPRING WASHER (B)
FLAT WASHER (C)

3/29/07 11:55:34 AM