Removing A Hot-Swap Dc Power Supply - IBM System x3650 M4 Type 7915 Problem Determination And Service Manual

Hide thumbs Also See for System x3650 M4 Type 7915:
Table of Contents

Advertisement

6. Route the power cord through the clip next to power-supply and through any
7. Connect the power cord to a properly grounded electrical outlet.
8. Make sure that the error LED on the power supply is not lit, and that the ac
9. If you are replacing a power supply with one of a different wattage, apply the

Removing a hot-swap dc power supply

When you remove or install a hot-swap dc power supply, observe the following
precautions.
Statement 29
CAUTION: This equipment is designed to permit the connection of the earthed
conductor of the dc supply circuit to the earthing conductor at the equipment.
This equipment is designed to permit the connection of the earthed conductor of the
dc supply circuit to the earthing conductor at the equipment. If this connection is
made, all of the following conditions must be met:
v This equipment shall be connected directly to the dc supply system earthing
v This equipment shall be located in the same immediate area (such as, adjacent
262
IBM System x3650 M4 Type 7915: Problem Determination and Service Guide
cable clamps on the rear of the server, to prevent the power cord from being
accidentally pulled out when you slide the server in and out of the rack.
power LED on the power supply are lit, indicating that the power supply is
operating correctly.
power information label provided with the new power supply over the existing
power information label on the server.
xxx-xxx/xxx-xxx
x,x/x,x
xx/xx Hz
Product certified in Shenzhen China
Made in China
xxx-xxx/xxx-xxx
x,x/x,x
xx/xx Hz
:
Manufacturer IBM Corporation
Copyright Code and Parts Contained Herein.
.
©Copyright IBM Corp 2010 All Rights Reserved
/
-
/
Canada ICES NMB 003 Class Classe A
electrode conductor or to a bonding jumper from an earthing terminal bar or bus
to which the dc supply system earthing electrode conductor is connected.
cabinets) as any other equipment that has a connection between the earthed
Power cord
connectors
,
V
.
-
-
-
KCC REM IBC 7915
XXXX
xxx

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents