Vertical flicker appears
Horizontal flicker appears
The screen is too bright or too dark
An after-image appears
An after-image remains after the
power has been turned off.
Green, red, blue, dark, and white
dots remains
Trouble Shooting
·
Press the Auto button.
·
Eliminate the vertical bars using the
More Settings of Phase/Clock in OSD
Main Controls.
·
Press the Auto button.
·
Eliminate the vertical bars using the
More Settings of Phase/Clock in OSD
Main Controls.
·
Adjust the contrast and brightness on
OSD Main Controls. (The backlight of
the LCD monitor has a fixed life span.
When the screen becomes dark or
begins to flicker, please contact your
dealer).
·
If an image remains on the screen for
an extended period of time, it may be
imprinted in the screen and leave an
after-image. This usually disappears
after a few hours
·
This is characteristic of liquid crystal
and is not caused by a malfunction or
deterioration of the liquid crystal. The
after-image will disappear after a peroid
of time.
·
The remaining dots are normal
characteristic of the liquid crystal used
in today' s technology
37