Philips 170C6FS/00 Service Manual page 44

44
2. Press the Load hex then select the hex file as shown
in Fig. 8.
4 Select NT68F633 then press the AUTO to running program ,
the firmware be updated as shown in Fig. 9~10.
Firmware Upgrade for CPU
Fig. 8
If there is a warring message coming as shown in Fig 13. , you
Fig. 9
have to check the AC power, Video cable, or Novatek MCU.
Fig.
4 Press the file --> exit to end program , as shown in Fig. 12.
2.09
Fig. 11
Fig. 12
Fig. 13