Isp Instruction; Firmware Upgrade For Cpu - Philips 170C6FS/00 Service Manual

Configuration and procedure
"Easywriter " The software
is provided by Novatek to upgrade the
firmware of CPU.
It is a windows-based program, which cannot be run in MS-DOS.
DDC2BI_ISP TOOL (3138 106 10396)
"Parallel Port of PC" and "15 pin-D-SUB connector of Monitor".
System and equipment requirements
1. An i486 (or above) personal computer or compatible.
2. Microsoft operation system Windows 95/98/2000/XP.
ISP Software " Easywrite "
3.
DDC2BI_ISP TOOL (3138 106 10396)
4.
Parallel Port to Print Port in PC
D-SUB to monitor
. DDC2BI_ISP TOOL
5 Connect
in Fig. 2.
Monitor (A)
Connect to
Mains cord
Video cable
6. Install and setup the Easywriter program
Step 1 : Make a folder in your PC as shown in Fig. 3.
For example : C:\170C6
Step 2 : Copy the Software Easywriter
as shown in Fig.3.
Step 3 : Unzip Easywriter.zip into your folder as shown in Fig. 3.
Step 4 : Double click the EasywriterV2.09a_user.exe icon to install the
Application as Fig. 4.
170C66

Firmware Upgrade for CPU

is for the interface between
as shown in Fig. 1
and Mains cord to Monitor as shown
170C6(B)
PC
Connect to Mains
cord at this moment.
ISP box
Fig.2
.zip into your folder
Step 5 :Copy the hex file to C:\170C6 as shown in Fig. 5 .
170C6
170C6
Update the firmware
Fig. 1
1. Double click the Easywriter.exe icon in desktop then appears
window as shown in Fig.7 .
Fig. 3
H170C6_V200
_8A18.hex
43
Fig. 4
Fig. 5
Fig. 6
Fig. 7