Tape Guide Assy (Sp); Tape Guide Assy (Tu) - Mitsubishi HS-HD1100U Service Manual

2-32.TAPE GUIDE ASSY (SP),

TAPE GUIDE ASSY (TU)

SET POSITION : Normal
Remove the following parts before replacing the TAPE
GUIDE ASSY (SP), (TU). Refer to the corresponding
items to install them.
• STAY PLATE (Item 2-2)
• BOTTOM ASSY (Item 2-3)
• MOTOR HOLDER (Item 2-16)
• PINCH ARM CAP (Item 2-17)
• PINCH UNIT (Item 2-17)
• BRAKE CAM PLATE (Item 2-19)
• BRAKE BELT (SP) (Item 2-23)
• BELT HOLDER (Item 2-23)
• BELT LEVER (Item 2-24)
• TENSION ARM (Item 2-25)
(Removal)
1. Loosen the TAPE GUIDE ASSY (SP) shown in the
Fig. 2-32-1 (turn it fully in the Unloading direction) to
remove it.
2. Loosen the TAPE GUIDE ASSY (TU) shown in the
Fig. 2-32-1 (turn it fully in the Unloading direction) to
remove it.
(Installation)
1. Apply GREASE (MULTEMP AC-DM)[859D055O90] to
the parts on the MAIN PLATE ASSY specified in the
Fig. 2-32-2.
2. Install the TAPE GUIDE ASSY (SP) shown in the Fig.
2-32-1.
3. Install the TAPE GUIDE ASSY (TU) shown in the Fig.
2-32-1.
4. Perform the Item 3-2-1. "GUIDE ROLLER Check" to
the Item 3-2-5. "Flatness Check of FM Waveform" of
the "Interchangeability Adjustment of the Mechanism".
TAPE GUIDE ASSY (SP)
GUIDE CATCHER (SP)
GUIDE CATCHER (TU)
Front of
MAIN PLATE ASSY
Apply GREASE (MULTEMP AC-DM) to the parts
- 24 -
TAPE GUIDE ASSY (TU)
Fig. 2-32-1
Back of
MAIN PLATE ASSY
Fig. 2-32-2
.