Table of Contents
Advertisement
3. Apply GREASE (MULTEMP AC-DM)[859D055O90] to
the points on the MAIN PLATE ASSY specified in the
Fig. 2-18-1.
4. Apply GREASE (MULTEMP AC-DM)[859D055O90] to
the points on the DOOR ARM specified in the Fig. 2-
18-1.
5. Install the DOOR ARM.
6. Match the Hole in the MAIN CAM with the Hole in the
MAIN PLATE ASSY shown in the Fig. 2-18-2.
7. Install the F/L PLATE shown in the Fig. 2-18-1 from
the front side (ARM (TU) side).
8. Insert the Boss of the F/L PLATE shown in the Fig. 2-
18-2 into the Groove of the MAIN CAM.
2-19.BRAKE CAM PLATE
SET POSITION : Normal
Remove the following parts before replacing the BRAKE
CAM PLATE. Refer to the corresponding items to install
them.
• STAY PLATE (Item 2-2)
• BOTTOM ASSY (Item 2-3)
• MOTOR HOLDER (Item 2-16)
• PINCH ARM CAP (Item 2-17)
• PINCH UNIT (Item 2-17)
(Removal)
1. Rotate the MAIN CAM in the Fig. 2-19-1 in the
direction shown by the arrow A. And move the
BRAKE CAM PLATE so that the three catches (a) of
the MAIN PLATE ASSY can be released.
2. Remove the BRAKE CAM PLATE.
(Installation)
1. Apply GREASE (MOLYKOTE G PASTE)
[859D055O50] to the points on the BRAKE CAM
PLATE specified in the Fig. 2-19-2.
2. Hook the BRAKE SPRING shown in the Fig. 2-19-3 to
the catch of the BRAKE (TU).
3. Install the BRAKE CAM PLATE, inserting the six
Guide Pins (b) shown in the Fig. 2-19-1 into the slits
of the BRAKE CAM PLATE.
4. Move the BRAKE SPRING in the Fig. 2-19-3 in the
direction of the arrow C to release the Catch of the
BRAKE (TU) and insert the BRAKE SPRING under
the Catch.
5. Rotate the MAIN CAM shown in the Fig. 2-19-1 in the
direction shown of the arrow B. And move the
BRAKE CAM PLATE to hook it to the three catches
(a) of the MAIN PLATE ASSY.
Hole
a
b
b
a
b
BRAKE CAM PLATE
Back
Back
Apply GREASE (MOLYKOTE G PASTE) to the points
- 14 -
MAIN CAM
F/L PLATE
Boss
Fig. 2-18-2
BRAKE CAM PLATE
MAIN CAM
B
a
Fig. 2-19-1
Back
70mm
40mm
Back
99mm
130mm
Fig. 2-19-2
A
b
.
Advertisement
Table of Contents
