A/C Head Unit; F/E Head Unit - Mitsubishi HS-HD1100U Service Manual

2-8. A/C HEAD UNIT

SET POSITION : Normal
(Removal)
1. Remove the LEAD CONNECTOR of the A/C HEAD
UNIT shown in the Fig. 2-8.
2. Remove the two screws (a) fastening the A/C HEAD
UNIT shown in the Fig. 2-8 to remove the A/C HEAD
UNIT.
(Installation)
1. Install the A/C HEAD UNIT shown in the Fig. 2-8.
Note : Never touch the Head of the A/C HEAD UNIT
shown in the Fig. 2-8. Clean the dirt on the Head
with alcohol if necessary.
2. Install the LEAD CONNECTOR of the A/C HEAD
UNIT shown in the Fig. 2-8.
3. Perform the Item 3-3. "A/C HEAD Adjustment" and
Item 3-4. "Phase Adjustment" of the
"Interchangeability Adjustment of the Mechanism".
2-9. F/E HEAD
SET POSITION : Normal
(Removal)
1. Lift the F/E HEAD shown in the Fig. 2-9-1 in the
direction by the arrow A to remove it.
Note : Be sure to replace the removed F/E HEAD with a
new one.
(Installation)
1. Install the F/E HEAD shown in the Fig. 2-9-1.
Note : Never touch the Head shown in the Fig. 2-9-2.
Clean it with alcohol if necessary.
a
Head
F/E HEAD
- 6 -
LEAD CONNECTOR
a
A/C HEAD UNIT
Fig. 2-8
F/E HEAD
Counter-
clockwise
Fig. 2-9-1
Head Part
Never touch the Head Part.
Fig. 2-9-2
A