In Case Of Difficultv - Clarion DXZZ75MP Owner's Manual

8. IN CASE OF DIFFICULTY
File system is not correct. Use IS09660 level 1, 2 or JOLIET or Romeo file
system.
Water droplets may form on Let dry for about 1 hour with the power on.
the internal lens when the car
is parked in a humid place.
Use IS09660 level 1, 2 or JOLIET or Romeo file
system.
Clean the compact disc with a soft cloth.
Write MP3IWMA files onto the disc properly.
Use MP3IWMA files encoded properly.
1. Turn down sound volume. Function can also be
restored by turning the power off and on again.
(Speaker volume is reduced automatically when
the speaker protection circuit operates).
2. If the sound is muted again, consult our service
department.
Use MP3IWMA files encoded properly.
Replace with a compact disc with no scratches.
Wipe the dirt off with a soft cloth moistened with
cleaning alcohol.
1. Turn the unit off.
2. Remove all wires attached to the power antenna
lead. Check each wire for a possible short to
ground using an ohm meter.
3. Turn the unit back on.
4. Reconnect each amplifier remote wire to the power
antenna lead one by one. If the amplifiers turn off
before all wires are attached, use an external relay
to provide remote-on voltage (excessive current
required).
Consult your store of purchase.
Turn off the power, then press
~~~~~~~\.R~eset
button
the
[RELEASE]
button and
~
remove the DCP.
Press the reset button for about
2 seconds with a thin rod.
Replace with a fuse of the same amperage. If the fuse
blows again, consult your store of purchase.
Compact disc is heavily
scratched or warped.
Compact disc is dirty.
MP3IWMA files are not
encoded properly.
File system is not correct.
DCP or main unit connectors
are dirty.
Files are not recognized as
an MP3IWMA file.
MP3IWMA files are absent in
a disc.
Incorrect wiring.
The microprocessor has
malfunctioned due to noise,
etc.
The speaker protection circuit
is operating.
Power antenna lead is
shorted to ground or
excessive current is required
for remote-on the amplifiers
or power antenna. .
Sound is cut or
skipped.
Noise is
generated or
noise is mixed
with sound.
Power does not
turn on.
(No sound is
produced.)
No sound output
when operating
the unit with
amplifiers or
power antenna
attached.
28
DXZ275MP/DXZ375MP