Dcp - Clarion DXZZ75MP Owner's Manual

• The DCP can easily be damaged by
shocks. After removing it, be careful not to
drop it or subject it to strong shocks.
• When the [RELEASE] button is pressed
and the DCP is unlocked, the car's
vibrations may cause it to fall. To prevent
damage to the DCP, always store it in its
case after detaching it. (See figure below.)
• The connector connecting the main unit
and the DCP is an extremely important
part. Be careful not to damage it by
pressing on it with fingernails, pens,
screwdrivers, etc.
Storing the DCP in the DCP Case
Hold the DCP, in the orientation as shown in the
figure below, and put it into the supplied DCP
case. (Ensure the DCP is in the correct
orientation.)
*
The DCP is unlocked
4. DCP
3. Remove the DCP.
Attaching the DCP
1. Insert the right side of the DCP into the main
unit.
2. Insert the left side of the DCP into the main
unit.
The control panel can be detached to prevent
theft. When detaching the control panel, store it
in the DCP (DETACHABLE CONTROL PANEL)
case·to prevent scratches.
We recommend taking the DCP with you when
leaving the car.
Removing the DCP
1. Press the
[SRC]
button for 1 second or
longer to switch off the power.
2. Press in the
[RELEASE]
button.
~
[RELEASE] button
~~
.
r)~
Note:
• If the DCP is dirty, wipe off the dirt with
a
soft, dry
cloth only.
6
DXZ275MP/DXZ375MP