Agitator Belt - Hoover U3721 Owner's Manual

When to replace belts
Check from time to time to be sure the belts are in good condition.
If they are stretched, cut, or broken, they should be replaced.
What to buy
Agitator belt - Hoover part No. 38528008
'Power Drive' belt - Hoover part No. 160147
How to replace

Agitator belt

Disconnect cleaner from electrical outlet and detach hose from
cleaner.
Place cleaner on the floor. For ease in installation, follow the direc-
tions given below, positioning yourself to the left, rear of the
cleaner.
CLIPS
1. Turn cleaner over. Release
handle to lowest position.
Remove plate on bottom of
cleaner by releasing clips. (See
illustration.)
2. Then lift off bottom plate.
16