Agitator Brush Roll; Agitator Belt; Storage - Hoover Z Owner's Manual

The agitator brush rollisdesigned tolast t helifetime o fthecleaner, it
typically s hould notneed replacement. Ifyoufeel t heagitator brush roll
needs tobechecked
o r replaced, take your cleaner to an Authorized
Hoover Sales and Service Center. Do not attempt to remove the
_agitator brush roll.
The agitator cavity underneath the cleaner can be checked for
debris such as hair, strings, etc.
Disconnect cleaner from electrical outlet. Turn cleaner over and
remove any debris that has accumulated on the agitator [)rush roll. D_
not attempt to remove the agitator brush roll
Return the cleaner to upright position.
The agitator belt is designed to last the lifetime of the cleaner. It typically
should not need replacement. If you feel the agitator beretneeds to be
checked or replaced, take your cleaner to an Authorized Hoover
Sames and Service Center. Do not attempt to remove the agitator
beret.
Disconnect cleaner from electrical outlet.
Cord storage
O pen the tool/cord storage compartment. Wrap the cord in a
clockwise direction around the two cord hooks, ending with the
plug end at the center of the storage cavity. The plug should not be
against the tool so it interferes with closing the door.