Hoover U3721 Owner's Manual page 18

9. Lift and pull, using screw-
driver as a lever. Guide end
opposite belt into position first.
11. Press firmly to be sure
agitator is secure.
13. Maintaining front connec-
tion, rotate bottom elate to
sure dirt duct is in position
under elate. Press firmlv.
10. Roll other side of agitator
into place.
12. The bottom plate attaches
in a hinge-like manner. Place
groove on front of bottom plate
over notched edge on front of
cleaner.
14. Lift and snap retaining
clips into place.
18