Hoover SPIRIT Spirit Vacuum Cleaner Owner's Manual page 8

Hard surface floors
Put the brush in the stationary
position by moving the brush lock
lever to "FLOOR" on the nozzle.
Rugs
Put the brush in floating position
by moving the brush lock lever
either to the left or right to
"RUG".
it may be advantageous to keep
the brush in a position where it
does not come in contact with
the carpet. To lock the brush into
the nozzle, move lever to "RUG",
then press the brush all the way
into the nozzle with your finger.
While still holding the brush,
move the lever to the "FLOOR"
position and the brush will be
locked into place. To release
brush, move the brush lock lever
either to the left or right to the
"RUG" position.
Note: Before using the nozzle on
hard surface floors, make certain
the brush is not locked into the
nozzle; then move the lever to the
"FLOOR" position.
For more efficient cleaning,
place the nozzle flat on rugs and
hard surface floors.
Edge cleaning feature
This feature provides for improv-
ed cleaning of carpet edges near
baseboards and solid furniture.
Passages have been provided to
the sides of the nozzle to increase
air flow carrying dust from the
carpet edge to the nozzle.
7
r