PT-60LCX64-K
6.2.
PROJECTION SECTION
PROJECTION SECTION
DISASSEMBLY METHOD OF PROJECTION UNIT
When reassembling, perform the step (s) in the reverse order. Bend, route and dress the wires as they were originally.
Note :
a. Place a cloth or some other soft material under the P.C. Boards or Unit to prevent damage.
b. When reinstalling, ensure that the connectors are connected firmly and electrical components have not been damaged.
c. Do not supply power to the unit during disassembly and reassembly.
When servicing these inner parts (LCD/Prism Unit, Light IN Polarizer Unit, etc.) of the Projection Unit,
it is strongly recommended to replace at clean room or clean bench.
Projection
Lens Unit
Note:
Top Duct Sponge
Joint Piece
Unit
Light IN
Polarizer
Blue Unit
LCD/Prism Unit
Fan Case Unit
Duct Unit
72
Top Duct 1 Unit
Filter Unit
Light IN
Polarizer
Red Unit
Optical Block Unit and
Optical Components
Light IN
Polarizer
Green Unit