Panasonic PT-60LCX64-K Service Manual page 62

PT-60LCX64-K
7. 1) Disconnect Connector P1006 and release from the clamper.
2) Remove the Main P.C.B. Frame by removing the 6 Screws (402), and remove the Fan 4 by removing the 2 Screws (435).
3) Remove the Power C.B.A. by removing the 5 Screws (411).
4) Disconnect Connector P804 (AC Cord) and release from the clamper.
Main P.C.B. Frame
402
Power
C.B.A.
Reassembly Note for Fan 4:
Install the Fan 4 with the 2 Screws (435) so that the name plate (manufacture's name etc.) face out (visible from the outside).
After servicing the Power C.B.A., be sure to connect the Connector P1006 on the Power C.B.A. to install the Fan 4.
411
P1006
Fan 4
402
Clampers
P804
411
Fig. D3-6
Note:
62
435
Air Flow
Name
Plate
AC Cord