Panasonic PT-60LCX64-K Service Manual page 49

3. 1) Remove the 5 Screws (402) and remove Clamper-1.
2) Remove the 2 Screws (451) on the Lamp Socket.
3) Disconnect the Lamp Connector.
4) Avoiding the Ballast C.B.A., disconnect Connector P1306 (Thermal Fuse Unit) inside of the Ballast C.B.A.
5) Remove the Clamper from the Ballast C.B.A.
Clamper-1
402
Replacement Note of Ballast C.B.A.:
These parts will be necessary when replacing the Ballast C.B.A. Set aside, and keep and re-use.
• The Clamper on Ballast C.B.A.
• The Thermal Fuse Unit
Lamp Connector
451
Clamper
P1306
Fig. D1-3
49
Lamp Socket
Note:
Do not remove the
Thermal Fuse Unit.
Ballast C.B.A.
Clamper-1
451
402
PT-60LCX64-K