Table of Contents
Advertisement
1. Attaching of Arm Cuff and Posture
During Measurement
Unfasten and open the cuff as shown in the figure.
MEASUREMENTS
Wind the arm cuff around the left upper arm tightly so that
bottom edge of the cuff is positioned about 1 – 2cm above
the elbow joint.
• When you will wind the cuff, please wind the cuff next to
the skin of possible.
(If m easurem ent is m ade by rolling the shirts or jacket
up over the arm , this w ill constrict the upper arm and
prevent accurate m easurem ent.)
• Cuff tube should be placed on the inside of your arm as
figure.
• Please m ake sure that the cuff is fastened tightly. Note
that uneven cuff winding will prevent proper m easure-
m ents.
- Eng 6 -
Advertisement
Table of Contents
