Play Back Function (Depending On Versions) - Icom IC-M73EURO Instruction Manual

Vhf marine transceiver
Hide thumbs Also See for IC-M73EURO:
Table of Contents

Advertisement

7
FUNCTION MODE OPERATION

■ Play back function (Depending on versions)

This transceiver has two voice recorders.
One is the manual recording function which can record for
30 seconds. The other is the automatic recording function
which can record the last 60 seconds of the receiving sig-
nal.
There are three play-back modes as follows.
• Playing back the all contents of the manual recording
Select "M-PLAY"
Playing back for 30 seconds (maximum).
• Playing back the last 30 seconds of the automatic recording
Select "LAST30S"
Not playing back.
• Playing back the all contents of the automatic recording
Select "LAST60S"
Playing back for 60 seconds (maximum).
20
Playing back for
30 seconds (maximum).
q Push [F] to enter the function mode.
• "PLAY" appears.
w Push [H/L•LOCK] to enter the play back selection
mode, and then push [Y]/[Z] to select the desired play
back mode from "M-PLAY," "LAST30S," or "LAST60S."
If there is no recorded signal in the transceiver,
"BLANK" appears.
• M-PLAY : Play back the manually
recorded signal.
• LAST30S
: Play back the last
30 seconds of the
automaticaliy re-
corded signal.
• LAST60S
: Play
back
automaticaliy re-
corded signal for
60 seconds.
e Push [H/L•LOCK] to play back
the recorded signal.
• "PL" blinks.
• To stop the play back, push
[H/L•LOCK] again.
DO NOT detach the battery pack
while the transceiver is turned ON.
Otherwise, the data could be lost or
deleted.
Deleting a recorded signal:
While selecting the desired data to delete, hold down
[FAV•★] for 3 seconds until 2 short beeps sound.
Blinks while playbacking.
the
Playback mode appears.
"BLANK" appears when
the transceiver has no
recorded signal.

Hide quick links:

Advertisement

Table of Contents
loading

This manual is also suitable for:

Ic-m73

Table of Contents