Opening Comment Entry Function; Opening Comment Programming - Icom IC-M73EURO Instruction Manual

7
FUNCTION MODE OPERATION

■ Opening comment entry function

The IC-M73/IC-M73EURO can assign up to 16-character
opening comments.
You may replace the factory-set opening comment with
a comment of your own. The opening comment appears
each time the IC-M73/IC-M73EURO is powered ON. The
comment may be up to 16 characters long.
You can use same characters as "Channel naming func-
tion." (p. 21)
D Opening comment programming
q Push [F] to enter the function mode, and then push [Y]/
[Z] to select the channel naming
function.
• "OC EDIT" appears.
w e P ush [H/L•LOCK] to edit the open-
e
ing comment.
• The 1st character of the currently pro-
grammed comment blinks.
22
e Push [Y]/[Z] to select a character.
r e P ush [CH/WX•U/I/C] to move to
e
the right; then push [Y]/[Z] to se-
lect a character.
• Pushing [SCAN•DUAL], moves to left.
i Continue until the desired charac-
ters have been entered, then push
[H/L•LOCK] to return to normal op-
eration.
Deleting the opening comment (All
clear):
While in the opening comment editing
mode, push [FAV•★] to delete.
The programmed opening comment is briefly displayed
or scrolled when the transceiver is powered ON.
However, the opening comment display can be skipped
by pushing [16/C].