Removing The Defective Sas Backplane - Fujitsu PRIMERGY TX2540 M1 Upgrade And Maintenance Manual

Server primergy tx2540 m1

Hide thumbs Also See for PRIMERGY TX2540 M1:

Table of Contents

Hard disk drives / solid state drives

Removing the defective SAS backplane

Figure 72: Disconnecting cables

Ê Disconnect the power cable (1) and the SAS cable (2) from the SAS

Ê Remove the two screws (3, see circles).

Figure 73: Removing the 2.5-inch HDD SAS backplane

Ê Lift up the SAS backplane (1) and at a slight angle, remove it from the guides

on the HDD cage (2).

Upgrade and Maintenance Manual