Printhead Assembly - Oki Microline 520 Service Handbook

%3.2.02 Printhead Assembly

3.2.02 Printhead Assembly
1. Perform this procedure: 3.2.01.
2. Open the access cover (1).
3. Lift and remove the ribbon. ( Not shown )
4. Pull the head clamp (2) towards the right and then rotate it up to release the printhead (3).
5. Pull the printhead straight up to remove it.
NOTE:
Installation After installing the printhead, check the printhead gap adjustment. Refer to Section 3.3
of this Service Handbook.
P/N 52107001 Ribbon: Black Consumable Both B.2.10
P/N 50707401 Clamp: Head RSPL Both B.2.07
P/N 50099501 Assembly: Printhead RSPL Both B.2.03
ML520/521 ( 96-02-04 )