Line Feed Motor Assembly - Oki Microline 520 Service Handbook

%3.2.21 Line Feed Motor Assembly

3.2.21 Line Feed Motor Assembly
1. Perform these procedures: 3.2.01, 3.2.06, 3.2.07, 3.2.16, 3.2.19, 3.2.20, and 3.2.21.
2. Firmly press down on the line feed motor assembly (1) while tilting the assembly out.
3. Remove the line feed motor assembly.
4. Remove the line feed connection cord (2).
CAUTION:
The line feed idle gear (3) should be removed only if it must be replaced. The claws will break when
the gear is removed. A new gear must be installed.
P/N 51228401 Gear: Line Feed Idle RSPL Both B.2.04
P/N 56510301 Motor: Line Feed (Assembly) RSPL Both B.2.04
P/N 56627201 Cord: Connection Line Feed RSPL Both B.2.04
ML520/521 ( 96-02-04 )