P
RINTHEAD GAP
1.
The printhead gap is the distance between the printhead and the platen.
Make sure the printer is turned OFF before you open the access
cover.
To adjust the gap, open the access cover and move the coloured lever (1) to the
recommended setting from the table.
NOTE
When the head gap is set to 2, 3, 4 or 5, the printer automatically slows down
for better print quality with multipart forms.
P
RINT QUALITY
ML5520ECO/ML5521ECO
Press PRINT QUALITY (1) to select:
High Speed Draft
Utility
CAUTION!
1
SETTING
MEDIA
1
Standard paper
2
2-part form (with carbon)
3
3-part form (with carbon)
4
4-part form (with carbon)
5
Envelopes or extra thick paper
1
>
>
>
>
Using your printer > 38
Lower quality, lower speed
Gothic typeface only
Medium quality, medium speed
Gothic typeface only