Chapter 3 %3.1.01 General Information - Oki Microline 520 Service Handbook

Chapter 3
%3.1.01 General Information
3.1.01 General Information
This section lists the parts replacement, adjustment, cleaning, lubrication, and shipping procedures.
Disassembly should not be performed unless absolutely necessary. NEVER perform disassembly on a
malfunctioning printer until you have followed the failure analysis procedures in Section Four of this
Service Handbook.
Follow the procedures listed in Adjustments and Service Settings . Adjustments may be required when
either consumable or parts are replaced. Failure to perform these procedures could result in unnecessary
service calls.
Proper performance of maintenance and cleaning will help to achieve the best possible print quality from
the printer.
ML520/521 ( 96-02-04 )