Oki Microline 520 Service Handbook page 81

%3.2.10 PC Connector
3.2.10 PC Connector
1. Perform these procedures: 3.2.01, 3.2.02, and 3.2.04.
2. Remove the two screws (1) and the connector holders. The holders are not shown.
3. Remove the PC connector (2).
NOTE:
Installation
Do not touch the contacts of the PC connector.
Do not touch the contacts of the space motor (3).
Cleaning
When cleaning, refer to Section 3.4 of this Service Handbook.
P/N 56729601 Connector: PC HD40 RSPL Both B.2.07
ML520/521 ( 96-02-04 )