Manual Configuration; Wireless Setup - D-Link DAP-1533 User Manual

Section 3 - Configuration
Enable
Check the box to enable the wireless function. If
Wireless:
you do not want to use wireless, uncheck the box to
disable all the wireless functions.
Wireless
When you are browsing for available wireless
Network
networks, this is the name that will appear in the list
Name:
(unless Visibility Status is set to Invisible, see below).
This name is also referred to as the SSID. For security
purposes, it is highly recommended to change from
the pre-configured network name.
Wireless Band: Displays either 2.4GHz or 5.0GHz.
Wireless
Choose the wireless mode you would like to use.
Mode:
Enable Auto
Select to enable auto channel scan.
Channel Scan:
Wireless
The Auto Channel Scan setting can be selected to
Channel:
allow the DAP-1533 to choose the channel with the
least amount of interference.
Channel Operating frequency band. Choose 2.4GHz for
Width: visibility to legacy devices and for longer range.
Choose 5GHz for least interference.
Visibility Select Invisible if you do not want the SSID of your
Status: wireless network to be broadcasted by the DAP-1533.
If checked, the SSID of the DAP-1533 will not be seen
by Site Survey utilities so your wireless clients will have to know the SSID of your DAP-1533 in order
to connect to it.
D-Link DAP-1533 User Manual

Manual Configuration

Wireless Setup

21