Manual Configuration - D-Link DBA-3621P Quick Installation Manual

Nuclias cloud-managed ac1300 wave 2 outdoor access point
Table of Contents

Advertisement

1.
On an Internet-connected computer,
o p e n a we b b row s e r a n d g o to
www.nuclias.com.
2.
Enter your D-Link Nuclias username and
password, then click Login.
Click on Settings > Add device.
3.
4.
Follow the onscreen instructions to set
up your device.

Manual Configuration

Note: The management computer, DHCP server
and DBA-3621P must be in the same subnet.
If you are unable to connect to Nuclias Cloud,
you may need to manually configure the
DBA-3621P using its web user interface. Use
one of the following methods to access the
web user interface:
Connecting through Ethernet
1.
Use an Ethernet cable to connect the
DBA-3621P to the management computer,
or to the switch or router the management
computer is connected to.
2.
Open a web browser and type in the
default host name of the DBA-3621P in the
address bar and press Enter. The default
host name is DBA-3621P-XXXX where
XXXX represents the last 4 characters
of the MAC address listed on the device
label located on the bottom of the device.
3.
Log in to the administration user
interface. The default login information is
Username: admin
Password: admin
DBA-3621P Quick Installation Guide
Connecting Wirelessly
1.
Connect the management computer to
the default SSID of the DBA-3621P. The SSID
will be in the format DBA-3621P-XXXX
where XXXX represents the last 4
characters of the MAC address listed on
the device label located on the bottom
of the device.
2.
Open a web browser and type in the
default host name of the DBA-3621P in the
address bar and press Enter. The default
host name is DBA-3621P-XXXX where
XXXX represents the last 4 characters
of the MAC address listed on the device
label located on the bottom of the device.
3.
Log in to the administration user
interface. The default login information is
Username: admin
Password: admin
Mounting
Gland
Sealing Nut
Figure 4: LAN Port Waterproof Enclosure
1.
Connect an Ethernet Cable to the LAN(PoE)
port on the DBA-3621P. Use the LAN Port
waterproof enclosures to seal the ports.
Sealing
3

Advertisement

Table of Contents
loading

Table of Contents