System - D-Link DAP-1533 User Manual

Section 3 - Configuration
Save to Local Use this option to save the current access point
Hard Drive:
configuration settings to a file on the hard disk of
the computer you are using. First, click the Save.
button. You will then see a file dialog, where you
can select a location and file name for the settings.
Load from Local Use this option to load previously saved access
Hard Drive: point configuration settings. First, click Browse to
find a previously save file of configuration settings.
Then, click the Load button to transfer those
settings to the access point.
Restore to Factory This option will restore all configuration settings
Default:
back to the settings that were in effect at the time
the access point was shipped from the factory.
Any settings that have not been saved will be lost,
including any rules that you have created. If you
want to save the current access point configuration
settings, use the Save button above.
Note: Restoring the factory default settings will not
reset the Wi-Fi Protected Status to Not Configured.
Reboot the Device:
Click to reboot the access point.
D-Link DAP-1533 User Manual

System

35