System - D-Link DAP-1533 User Manual

Section 3 - Configuration
Save Settings To Use this option to save the current access point
Local Hard Drive:
configuration settings to a file on the hard disk of
the computer you are using. First, click the Save
button. You will then see a file dialog, where you
can select a location and file name for the settings.
Load From Local Use this option to load previously saved access
Hard Drive:
point configuration settings. First, use the Browse
control to find a previously save file of configuration
settings. Then, click the Load button to transfer
those settings to the access point.
Restore To This option will restore all configuration settings
Factory Default:
back to the settings that were in effect at the time
the access point was shipped from the factory.
Any settings that have not been saved will be lost,
including any rules that you have created. If you
want to save the current access point configuration
settings, use the Save button above.
Reboot The Click to reboot the bridge.
Device:
D-Link DAP-1533 User Manual

System

58