Wireless Setup; 2.4 Ghz - D-Link DAP-1533 User Manual

Section 3 - Configuration
Wireless Type: Select Infrastructure or Ad-Hoc from the drop-down
menu.
Wireless When you are browsing for available wireless
Network networks, this is the name that will appear in the list
Name: (unless Visibility Status is set to Invisible, see below).
This name is also referred to as the SSID. For security
purposes, it is highly recommended to change from
the pre-configured network name.
Wireless Displays 2.4GHz.
Band:
Wireless Choose the wireless mode you would like to use.
Mode:
Wireless The Auto Channel Scan setting can be selected to
Channel: allow the DAP-1533 to choose the channel with the
least amount of interference.
Select the Channel Width:
Channel
Auto 20/40 - Select if you are using both 802.11n and non-802.11n wireless devices.
Width:
20MHz - Select if you are not using any 802.11n wireless clients.
Wireless This feature allows you to clone the wireless MAC address to connect the device.
MAC Clone:
Enable:
Select to enable Wireless Mac Clone.
MAC
Enter the desired MAC address connected to your bridge to enable the clone function.
Address:
D-Link DAP-1533 User Manual

Wireless Setup

2.4 GHz

50