Replacing The Control-Buttons Board; Procedure; Post-Requisites - Dell Inspiron 20 Owner's Manual

Replacing the Control-Buttons
Board
WARNING: Before working inside your computer, read the safety
information that shipped with your computer and follow the steps in
Before Working Inside Your
computer, follow the instructions in
Computer. For more safety best practices, see the Regulatory
Compliance home page at dell.com/regulatory_compliance.

Procedure

1 Connect the control-buttons board cable to the control-buttons board.
2 Slide the control-buttons board into the slot on the display bezel and
adhere the Mylar sheet to the display bezel.

Post-requisites

1 Replace the back
2 Follow the procedure from step 3 to step 5 in "Replacing the
Assembly".
Computer. After working inside your
cover.
After Working Inside Your
Stand
37