Replacing The Power-Adapter Port; Procedure; Post-Requisites - Dell Inspiron 20 Owner's Manual

Replacing the Power-Adapter
Port
WARNING: Before working inside your computer, read the safety
information that shipped with your computer and follow the steps in
Before Working Inside Your
computer, follow the instructions in
Computer. For more safety best practices, see the Regulatory
Compliance home page at dell.com/regulatory_compliance.

Procedure

1 Slide the power-adapter port into the bracket on the display-panel base.
2 Align the screw hole on the power-adapter port with the screw hole on
the bracket on the display-panel base.
3 Replace the screw that secures the power-adapter port to the bracket on
display-panel base.
4 Route the power-adapter port cable on the system board and connect
the cable to the system board.

Post-requisites

1 Replace the VESA-mount
2 Replace the system-board
3 Replace the back
4 Follow the procedure from step 3 to step 5 in "Replacing the
Assembly".
Computer. After working inside your
bracket.
shield.
cover.
After Working Inside Your
Stand
55