Removing the Antenna
WARNING: Before working inside your computer, read the safety
information that shipped with your computer and follow the steps in
Before Working Inside Your
computer, follow the instructions in
Computer. For more safety best practices, see the Regulatory
Compliance home page at dell.com/regulatory_compliance.
Prerequisites
1
Follow the procedure from step 1 to step 5 in "Removing the
Assembly".
2
Remove the
3
Remove the
Procedure
1
Note the routing of the camera cable and remove it from the routing
guides on the display-panel base.
2
Note the location of the antennas and pry the antennas from the display-
panel base.
3
Note the routing of the antenna cables and disconnect the antenna
cables from the wireless card.
4
Remove the antenna cables from under the camera cable.
back
cover.
system-board
shield.
Computer. After working inside your
After Working Inside Your
Stand
43