Configuration (Dmx); Dmx Personality; Dmx Control - Chauvet COLORdash Par-Hex 12 User Manual

Configuration
(DMX)

DMX Personality

DMX Control

COLORdash™ Par-Hex 12 User Manual Rev. 1
Use DMX configurations to operate the product with a DMX controller.
This setting allows you to choose a particular DMX personality.
1. Go to the Channel main level.
2. Select the desired personality (6 Ch, 8 Ch, 12Ch, 13Ch, HSV or HSI).
·
See the DMX Values
personality.
·
Make sure that the starting addresses on the various products do not overlap due to
the new personality setting.
In this mode, each product will respond to a unique starting address from the DMX controller. All
products with the same starting address will respond in unison.
1. Select a DMX personality as shown in
2. Set the starting address:
3. Go to Address main level.
4. Select the starting address (001–510).
The highest recommended starting address for each DMX mode is as follows:
DMX DMX
Mode Address
6 Ch 507
13Ch 500
section for the highest starting address you can select for each
DMX Personality.
DMX
Mode Address
8 Ch
HSV
DMX DMX
Mode
505 12Ch
510 HSI
Operation
DMX
Address
501
510
-13-