Table of Contents
Advertisement
Operation
Main Level
LED Frequency
Fixture Hours
Information
Version
Factory Setting
Configuration (DMX)
Use control configurations to operate the product with a DMX controller.
Control Personalities
This setting allows you to choose a particular control personality.
1.
Go to the DMX Personality main level.
2.
Select the desired personality (see table below).
•
See the
personality.
•
Make sure that the starting addresses on the various products do not overlap due to the
new personality setting.
Starting Address
Each product will respond to a unique starting address from the DMX controller. All products with the same
starting address will respond in unison.
1.
Go to the DMX Address main level.
2.
Select the starting address (001–512).
The highest recommended starting address for each DMX mode is as follows:
Ovation F-55WW User Manual Rev. 2
Programming Levels
600Hz
1200Hz
2000Hz
4000Hz
6000Hz
25KHz
_ _ _ _H
V_._
UID
_ _ _ _ _ _ _ _ _ _ _ _
No
Yes
Personality
dimmer
1Ch:
dimmer,
2Ch:
strobe
dimmer,
5Ch:
strobe, auto
programs, auto
speed, dimmer
speed
Starting Address
section for the highest starting address you can select for each
Personality
5 Ch
2 Ch
1 Ch
Description
Selects the PWM output frequency
Shows total hours the product has
been powered on
Shows installed software version
Shows product UID
Reset to factory defaults
Channels
1
2
5
Address
508
511
512
Page 8 of 15
Advertisement
Table of Contents
