Mounting; Orientation; Rigging; Procedure - Chauvet COLORdash Par-Hex 12 User Manual

Setup

Mounting

Orientation

Rigging

Procedure

Mounting Diagram
-8-
Before mounting this product, read and follow the
mounting clamps, go to http://trusst.com/productcategory/base-plates-accessories-clamps/.
Always mount this product in a safe position and make sure there is adequate room for
ventilation, configuration, and maintenance.
CHAUVET® recommends using the following general guidelines when mounting this product.
·
When selecting an installation location, consider easy access to this product for operation,
programming adjustments, and routine maintenance.
·
Make sure to mount this product away from any flammable material as indicated in the
Safety Notes.
·
Never mount in places where rain, high humidity, extreme temperature changes, or
restricted ventilation may affect the product.
·
If hanging this product, make sure that the mounting location can support the product's
weight. See the Technical Specifications
product.
·
When hanging this product, always secure to a fastening device using a safety cable (such
as CH-05 from CHAUVET®).
The COLORdash™ Par-Hex 12 comes with a double-yoke bracket to which you can either
attach mounting clamps for hanging or simply use as a floor stand. You must supply your own
mounting clamps. Make sure the clamps (such as CLP-15 from CHAUVET®) are capable of
supporting the weight of this product. Use at least one mounting point per product.
Safety Cable
Floor Mounting
Safety Notes. For our CHAUVET® line of
for the weight-bearing requirements of this
Mounting Clamps
Overhead Mounting
COLORdash™ Par-Hex 12 User Manual Rev. 1