Table of Contents
Advertisement
4. Operation
Control Panel Operation
To access the control panel functions, use the four buttons located underneath the display. Please refer to
the
Product Overview
to see the button locations on the control panel.
Button
<MENU>
<UP>
<DOWN>
<ENTER>
Menu Map
Mode
Programming Levels
1-CH
DMX Mode
2-CH
4-CH
Automatic
P--
Programs
Auto Speed
S--
Sound-Active
Snd
Mode
Sound
SenS
Sensitivity
Dimmer
U--
Dimmer
dIM
Speed Mode
Temperature
teMP
Configuration (DMX)
The EVE P-100 WW works with a DMX controller. Information about DMX is in the CHAUVET DMX Primer,
which is available from the Chauvet website
DMX_Primer_rev05_WO.pdf.
Starting Address
When selecting a starting DMX address, always consider the number of DMX channels the selected DMX
mode uses. If you choose a starting address that is too high, you could restrict the access to some of the
product's channels.
The EVE P-100 WW uses up to 4 DMX channels, which defines the highest configurable address as 509.
If you are not familiar with the DMX protocol, download the DMX Primer from www.chauvetdj.com.
To select the starting address, do the following:
1.
Press <MENU> repeatedly until 1-CH, 2-CH, or 4-CH shows on the display.
2.
Press <ENTER>.
3.
Use <UP> or <DOWN> to select the starting address, from d 1–512.
4.
Press <ENTER>.
Page 6 of 14
Function
Press to find an operation mode or to back out of the current menu option
Press to scroll up the list of options or to find a higher value
Press to scroll down the list of options or to find a lower value
Press to activate a menu option or a selected value
d 1–512
P 1–3
S 1–100
Snd1–2
u 0–100
d 0–255
OFF
dIM1–3
_ _
http://www.chauvetlighting.com/downloads/
Description
1-channel DMX mode
2-channel DMX mode
4-channel DMX mode
Automatic programs
Program speed for P1–3
Sound-active programs
Sets sound sensitivity
0–100%
Dimmer speed settings: off, fast, medium, or slow
Displays current product temperature in °C
EVE P-100 WW User Manual Rev. 3
Operation
Advertisement
Table of Contents
