Table of Contents
Advertisement
Setup
3. S
ETUP
AC Power
AC Plug
Fuse
Replacement
-6-
Each COLORdash™ Par-Hex 12 has an auto-ranging power supply that works with an input
voltage range of 100 to 240 VAC, 50/60 Hz. To determine the power requirements for each
COLORdash™ Par-Hex 12, refer to the label affixed to the product. You can also refer to the
Technical Specifications
The listed current rating indicates the maximum current draw during normal operation. For more
information, you may download Sizing Circuit Breakers from the CHAUVET® website:
www.chauvetlighting.com/download/pro.
Always connect this product to a protected circuit with an appropriate electrical ground
to avoid the risk of electrocution or fire.
Never connect this product to a rheostat (variable resistor) or dimmer circuit, even if the
rheostat or dimmer channel serves only as a 0 to 100% switch.
The COLORdash™ Par-Hex 12 comes with a Neutrik® powerCON A connector on one end and
an Edison plug on the other end (US market). If the power cord adapter that came with your
product has no plug or you need to change the Edison plug, use the table below to wire the new
plug.
Connection
AC Live
AC Neutral
AC Ground
1. Disconnect this product from the power outlet.
2. Using a flat-head screwdriver, unscrew the fuse holder cap from the housing.
3. Remove the blown fuse and replace with a another fuse of the same type and rating
(T 2 A, 250 V).
4. Screw the fuse holder cap back in place and reconnect power.
Make sure to disconnect the product's power cord before replacing a blown fuse. Always
replace the blown fuse with another of the same type and rating.
chart in this manual.
Wire (U.S.)
Black
White
Green/Yellow
Wire (Europe)
Brown
Yellow or Brass
Blue
Green/Yellow
COLORdash™ Par-Hex 12 User Manual Rev. 1
Screw Color
Silver
Green
Advertisement
Table of Contents
