Canceling Direct Transmissions; Canceling Reserved Transmissions - Oki MB760dnfax Basic Manual

2
The confirmation screen for the next
original is displayed. Press [JOB CANCEL].
• If you press [JOB FINISH], the scanned originals are
sent.
• If you leave the screen for the next original unattended
for the period of the auto clear setting time (45 sec. by
manufacturer default) after it appears, the memory
transmission is canceled.
3
The confirmation screen for the deletion is
displayed. Press [YES].

Canceling direct transmissions

You can cancel the direct transmission during scanning.
Note
• Even if you cancel transmission in the direct TX mode, the
part of the original that was scanned before transmission is
canceled has been sent.
1
Press the [STOP] button on the control
panel while the original is being scanned.
CHECKING AND CANCELING THE COMMUNICATIONS
The scanning and transmission are stopped.

Canceling reserved transmissions

You can display the list of the reserved transmissions, and
cancel the reserved transmissions that are in the queue or in
progress.
1
Press [JOB STATUS], and then select the
[FAX] tab.
The list of the reserved transmissions is displayed. This
step is the same as that for checking the reserved
transmission.
P.71 "Checking reserved transmissions"

2
Select the reserved transmission you want
to delete, and then press [DELETE].
More than one job can be selected.
In the "Status" column, you can check the status of the
reservation. "Wait" indicates that the data are waiting to
be sent. "Line1" indicates that the data are being sent.
Delayed transmission reservation and polling
transmission/reception can be canceled.
- 73 -
1
2
3
4
5
6