Enlargement And Reduction Copying; Automatic Magnification Selection (Ams) - Oki MB760dnfax Basic Manual

Enlargement and Reduction
Copying
You can change the reproduction ratio of copied images in the
following procedures:

Automatic Magnification Selection (AMS):

You need to specify the copy paper size in advance. Then this
equipment will detect the original size and automatically select
the optimal reproduction ratio for the copy paper size.
Specifying both original size and copy paper size
separately:
You need to specify both the original size and the copy paper
size separately in advance. According to the sizes you
specified, the optimal reproduction ratio is selected
automatically. This feature is used when Automatic
Magnification Selection is not available, such as when copying
OHP film originals.
Specifying reproduction ratio manually:
You can select the desired reproduction ratio by pressing
[ZOOM] or one-touch zoom buttons on the touch panel.
Memo
• The available range of reproduction ratio differs depending
on whether the original is placed on the original glass or on
the RADF (Reversing Automatic Document Feeder).
Original glass: 25 to 400%
RADF: 25 to 200%
Automatic Magnification Selection
(AMS)
When using the RADF (Reversing Automatic Document
Feeder), specify the copy paper size in advance so that this
equipment will detect the original size and automatically select
the optimal reproduction ratio to the copy paper size.
This function is available when the size of the originals is as
follows:
Other than North America: A4, A5, B5, FOLIO
North America: Letter, Legal
Note
• This function does not work properly when copying on the
original glass or using the originals below. Select other
methods when copying them.
• Highly transparent originals (e.g. OHP film, tracing paper)
• Totally dark originals or ones with dark borders
• Non-standard size originals (e.g. newspapers, magazines)
1
Place paper in the tray(s).
2
Press [ZOOM] on the touch panel.
3
Select the desired paper size, press [AMS]
and then [OK].
Memo
• If you want to select a paper size other than the
following, you need to register the size as "OTHER".
Once you register this size, it will be specified every
time you press [OTHER] on the touch panel.
Other than North America: A4, A5, B5
North America: Letter, Legal
For how to register, see the following page:
 P.48 "Registering paper sizes to "OTHER" size"
• Paper sizes can also be registered by pressing the
desired tray button of the equipment status indication
area on the BASIC menu.
4
Place the original(s).
If the original is placed on the original glass, the
reproduction ratio is set when the original is placed. If the
original is placed on the RADF, the reproduction ratio is
set when the original is scanned.
5
Select other copy modes as required, and
then press the [START] button on the
control panel.
- 47 -
BASIC COPY MODES
1
2
3
4
5
6