Sony STR-DA7100ES Service Manual page 17

RM-US106A
This remote is only for 2ND ZONE out and
3RD ZONE out operations. You cannot
control the main receiver directly with this
remote.
Operating the main receiver from
the 2nd (or 3rd) zone
Name Function
A ?/1
Press to turn a receiver in the
2nd (or 3rd) zone on or off.
B Command
Press to select the command
mode mode of the remote.
buttons
Name Function
C Input
Press one of the buttons to
buttons select the component you want
to use. When you press any of
the input buttons, the receiver
turns on. The buttons are
factory assigned to control Sony
components as follows. You can
change the button assignments
following the steps in
"Changing button assignments
(RM-US106A only)".
Button Assigned Sony
component
VIDEO 1 VCR (VTR mode 3)
VIDEO 2 VCR (VTR mode 1)
VIDEO 3 VCR (VTR mode 2)
DVD DVD player
TV/SAT TV tuner
TAPE Tape deck B
MD/DAT MD deck
SA-CD/CD Super Audio CD/CD
player
TUNER* Built-in tuner
SOURCE The current input
selected for the main
receiver
* The setting cannot be changed.
D SHIFT
When the tuner is selected,
press repeatedly to select a
memory page for presetting
radio stations or tuning to preset
stations.
E MUTING
Press to mute the sound.
F MASTER
Press to adjust the volume level
VOL +/– for 2ND ZONE or 3RD ZONE
output.
G RM SET UP
Lights up when data is being
indicator sent.
H RM SET UP
Press to change the category of
the buttons.
STR-DA7100ES
Operating the components
connected to the main receiver
from the 2nd (or 3rd) zone
Name Function
I Operation
The following table describes
buttons* the function of the buttons.
Button(s) Function
N
Starts play. (Starts play
on the front side of the
cassette.)
n
Starts play on the
reverse side of the
cassette.
X Pauses play or
recording, and starts
recording when the
component is in
recording standby.
x
Stops play.
./> Skips tracks.
J CH/
Press repeatedly to select a
PRESET/ preset station or channel. When
D.SKIP using a multi-disc changer,
+/–* press to skip a disc.
* The function of these buttons switches
automatically each time you press the input
buttons C. The above explanation is intended to
serve as an example only. Therefore, depending
on the component, the above operation may not
be possible or may operate differently than
described.
17