Workstation Management; Initial Workstation Configuration And Deployment - HP xw4600 Service And Technical Reference Manual

Table 3-1 Computer Setup (F10) Utility menu descriptions (continued)
Heading
* Available on selected models.
**These options should be used by advanced users only.

Workstation management

The HP Client Management Solutions (CMS) which are available for download from
go/easydeploy
environment. This section summarizes capabilities, features, and key components of workstation
management including:
● Initial workstation configuration and deployment on page 35
●
Installing a remote system on page 36
●
Replicating the setup on page 36
●
Updating and managing software on page 37
● ROM Flash on page 39
● FailSafe Boot Block ROM on page 39
●
Asset tracking and security on page 40
●
Fault notification and recovery on page 49
●
Dual-state power button on page 49
NOTE: Support for specific features described in this guide can vary by model and software version.

Initial workstation configuration and deployment

Your workstation includes a preinstalled system software image. After a brief software unbundling
process, the workstation is ready to use.
If you prefer to replace the preinstalled software image with a customized set of system and application
software, several methods are available for deploying a customized software image, including:
●
Installing additional software applications after unbundling the preinstalled software image
● Using a disk cloning process to copy the contents from one hard drive to another
The best deployment method depends on your information technology environment and processes. The
PC Deployment section of the HP Lifecycle Solutions Web site (http://www.hp.com/support/HPLS)
provides information to help you select the best deployment method.
The Restore Plus! CD, ROM-based setup, and ACPI hardware provide further assistance with recovery
of system software, configuration management and troubleshooting, and power management.
ENWW
Option
Slot 5 (PCI) Slot 5 option ROM download (Enable/Disable) and latency timer.
Slot 6 (PCI) Slot 6 option ROM download (Enable/Disable) and latency timer.
Slot 7 (PCI) Slot 7 option ROM download (Enable/Disable) and latency timer.
are standards-based solutions for managing and controlling workstations in a networked
Description
http://www.hp.com/
Workstation management 35