Using The Computer Setup (F10) Utility To Reset Cmos - HP xw4600 Service And Technical Reference Manual

Using the Computer Setup (F10) Utility to Reset CMOS

1. Access the Computer Setup (F10) Utility menu. When the Computer Setup message appears in
the lower-right corner of the screen, press F10. Press Enter to bypass the title screen, if necessary.
NOTE:
powered off, then on again, to access the utility.
2. From the Computer Setup (F10) Utility menu, select File>Set Defaults, and then select Exit. This
restores the settings that include boot sequence order and other factory settings. However, it does
not force hardware rediscovery.
NOTE:
system date and time, must be reset.
ENWW
If you do not press the
The workstation passwords and any special configuration information, including the
F10 key while the message is displayed, the workstation must be
Clearing and Resetting the CMOS 151