Quick Start Parameters (P001 To P007) - Siemens SITRANS LR 300 Instruction Manual

Quick Start Parameters (P001 to P007)

Parameters P001 to P007 are the main settings that apply to all applications and make the
system operational.
P001 Operation
Sets the display variable for the local LCD only. (The primary variable for the HART/
Profibus Master is controlled by P201.)
Values
Level
(P001 = 1)
Note:
P050 sets the SITRANS LR 300 to calculate readings based on reservoir
P002 Material
Identifies the material being monitored.
Values
P003 Measurement Response
Sets the reaction speed of the unit to the measurement changes in the target range.
Measurement Response
1
Values
2
3
4
5
Set P003 to a measurement response just faster than the maximum filling or emptying
rate (whichever is greater).
If the SITRANS LR 300 does not keep step with the rate of level change, select a faster
rate. If the reading bounces around an average value, select a slower rate. In general,
Page 56
(F = 3)
1 Level: material level referenced to empty distance (P006)
2 Space: space to material level referenced from span (P007)
3 Distance: distance to target referenced from the flange face
Space (a.k.a. ullage)
1 Liquids or slurries
P700/P701
0. 1 m/minute slow
1m/minute
10m/minute
100m/minute
1000m/minute fast
SITRANS LR 300 – INSTRUCTION MANUAL
(P001 = 2)
(F = 2)
Echo Verification
P711
2
2
2
0
0
Distance
(P001 = 3)
Fail-Safe Timer
P070
100
10
1
0. 1
0
7ML19985CL02