Horn Antenna Or Wave Guide Dn Hole Pattern, Pn16; Horn Antenna Sanitary Connection - Siemens SITRANS LR 300 Instruction Manual

Horn Antenna or Wave Guide DN Hole Pattern, PN16

process temperature (°C)
80mm
150mm

Horn Antenna Sanitary Connection

4" PTFE
WARNING: Never attempt to loosen, remove or disassemble
process connection or instrument housing while vessel contents
under pressure.
2.
Customer to provide adequate bolting and flat-faced gasket to retain vessel pressure and
provide sufficient sealing.
1.
Customer to provide adequate bolting and flat-faced gasket to retain vessel pressure and
provide sufficient sealing.
7ML19985CL02
100mm
200mm
process temperature (°C)
SITRANS LR 300 – INSTRUCTION MANUAL
Process Connection Series:
• 51006 to 51012 with 22452
series flange.
• Ensure your unit has the
process identification tag
showing one of this series,
and 22452 stamped on flang
• Reference drawing number
shown on the process devic
tag. This drawing can be
obtained on request.
Process Configuration:
• 51009
• Ensure unit has the
process identification
tag showing this series.
• Reference drawing
number is shown on the
process device tag. This
drawing can be obtained
on request.
1
Page 105